52
SPEECH In future many RDS radio
stations will differentiate be-
tween music and speech
programmes.
You can alter the tone for
speech programmes from
between “SPEECH 0 ... 4”.
SPEECH 0:
Music/speech off
SPEECH 1:
Linear reproduction (bass,
treble and Loudness set to
“0”)
SPEECH 2-4:
Different settings for vol-
ume, bass and treble with
the Loudness being
switched off.
Try out which SPEECH set-
ting you like most.
BEEP Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9. (0 =
off).
ANGLE Use this setting to alter the
viewing angle to your liking
from -1 to 0 to +1.
BRIGHT You can adjust the display
brightness from between 1
to 16. You can also select
different values for day and
night.
Selecting the night bright-
ness:
Switch on the vehicle lights
and programme the bright-
ness value. The car radio’s
lighting connector must be
hooked up to the vehicle’s
electric system for this to
function properly.
COLOUR
(Variocolour)
For gradually matching the
radio illumination with the
dashboard lighting.
green ..............light orange................. red
LED ON Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
LEARN KC To “train” a second
KeyCard.
Please read the information
in chapter “KeyCard theft
protection system - “Train-
ing” a second KeyCard”.
READ KC To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6..) and the serial
number.
With the extra card it is pos-
sible to display the Short
Additional Memory (S.A.M.)
data entered by your spe-
cialised dealer. See chapter
“Short Additional Memory
S.A.M.”.
If you remove the KeyCard
during the reading process,
“READ KC” will show on the
display panel. The unit con-
tinues to play but does not
München RDM126 gb® 03.05.2002, 10:33 Uhr52
To Next Page
Loading...
Need help?
General
