Blaupunkt MUNCHEN RDM 126 User Manual

35
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
C GEO
To adjust the balance (left/right) and
fader (front/rear) with the rocker
switch.
Fader front
Fader rear
Balance left
Balance right
The last setting will be stored automat-
ically.
To switch off GEO: Press button once
again.
If the setting remains unchanged with-
in four seconds, the display will switch
back to the previous condition.
Extra function GEO
Separate balance and fader settings
for traffic messages. See chapter “Ad-
justing GEO for traffic messages and
the warning beep”.
D AUD
To adjust the treble and bass frequen-
cies with the rocker switch.
Treble +
Treble –
Bass –
Bass +
The last setting will be stored automat-
ically.
To switch off AUD: Press button once
again.
If the setting remains unchanged with-
in four seconds, the AUD setting will
be terminated automatically.
Extra function AUD
Loudness: When listening at a low lev-
el, the Loudness function will create a
more natural sound by emphasising
the low frequency range.
To switch the Loudness on/off:
Press the AUD button for approximate-
ly two seconds until you hear a beep.
The Loudness function is active if “LD”
appears in the display.
For more information see chapter
“DSC programming”.
München RDM126 gb® 03.05.2002, 10:33 Uhr35

Blaupunkt MUNCHEN RDM 126 Specifications

General

Brand	Blaupunkt
Model	MUNCHEN RDM 126
Category	Car Receiver
Language	English