Navigation
Navigation
Loading navigation data
The
navigation software
and
map
data
are
located on a
MicroSD
card.
For
devices
with navigation, the device
is
delivered with the
MicroSD
card
in the
MicroSD
card
slot.
To
be
able to
use
the navigation, the
MicroSD
card
must
be
inserted
in
the
card
slot.
..-
Open
the cover of the
card
slot
(!_
3} next to the
DVD/
CD
tray.
..-
Insert the
MicroSD
card
with the printed
side
up into
the slot until
it
engages.
..-
Close
the
cover
of
the
slot.
Download
of
map data
To
ensure
that you
have
the latest
version
of
the
map
data
when you
purchase
the
New
York,
you
have
30
days
from
the first
GPS
positioning
to
download the latest
version
of
the
map
data
once
and
free
of
charge
to the standard
MicroSD
card
from the Internet at www.naviextras.com.
You
can
always
purchase
map
material from this
site
at
a later time.
Import
ant
not
e:
If
the
MicroSD
card
is
lost or
damaged,
the naviga-
tion
map
license
associated
with
the
card
will
be
lost.
In
this
case,
the
license
must
be
purchased
anew
with
a new
MicroSD
card.
Starting the navigation
..-
In the
main
menu,
press
Navigation to start the navi-
ga
tion mode.
The
navigation
menu
is
displayed.
If
you start the
navigation for the first time, the setup wizard
is
dis-
played.
I
nit
ial startup
If
you
start the navigation for the first time, a setup
wizard
appears
which performs the
basic
settings for the naviga-
tion .
..-
Adjust the language for the navigation.
This
can
be
a different language from the other functions
of
the
New
York
.
..-
Confirm the selection with [ v
].
The
end-user
license
agreement
is
displayed .
..-
Read
the end-user
license
agreement.
If
you
agree
with the
terms
and
conditions,
press
[ v].
The
configuration
wizard
starts
.
..-
Press
[
v]
to continue.
30
I
..-
Select
a voice for the voice output
of
the navigation.
Various
voices
are
available for the
languages
.
..-
Confi
rm the selection with [ v
].
..-
Specify
the time format and the units for the naviga-
tion.
Next,
press
[ v
].
On
the next
screen,
you
can
perform your preferred
route settings.
..-
If
necessary,
change
the entries
by
pressing
the dis-
played menu entries.
..-
Press
[ v
],
after you adjusted the settings .
..-
To
u
ch
[ v ], to finish the configuration.
The
navigation menu
is
displayed .
En
tering
a
destination
Destinations
can
be
entered
in
different
ways:
Via
the
ad-
dress
or
as
point of interest from the
database
of
points
of interest.
Points
of
inter
est
can
be
sights,
museums,
sta-
diums,
petrol stations .
Address
..-
Open
the navigation menu.
..-
Press
on
Fi
nd.
The
menu for the destination entry is displayed.
..-
Press
Find Addres
s.
To Next Page
Loading...
