DURBAN224 DAB BT 22.05.19 17:00
8 8
Press the button SRC for approx. 2 seconds
to start scanning.During the scan, the display
alternately displays "SCAN" and the current
frequency as well as memory bank or station
name.
Note:
• You can adjust the scan time for each station
(see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
Scanning all receivable stations of the waveband
Briey press the button SRC to continue
listening to the station that is currently.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and stored the 5 FM stations oering the strongest
reception in the region in the FMT memory bank.
Any previously stored stations in this memory
bank are deleted in the process.
In the reception areas “ASIA”,”USA”,”SOUTH AMERI-
CA”, and “THAILAND”,you can also store 5 AM
stations in the AMT memory bank.
Select a memory bank of the desired waveband,
e.g. FMT or AM.
Press the SRC button for approx. 2 seconds. The
tuner starts the automatic station seek tuning;
the display shows "FM TSTORE". After the storing
is completed, the radio plays the station at memory
location 1 of the FMT or AMT level.
Note:
• For the reception area "EUROPE": If the priority
for trac information is switched on( ), only
trac information stations are stored.
• If the FMT or AMT memory bank is deactivated
(see the chapter "User settings", section "Making
settings in the "TUNER" menu", menu item "BAND
SELECTION"), it is automatically reactivated if you
initiate the Travelstore function.
In the reception areas "EUROPE" and "USA", an FM
station can transmit its current programme type,
e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE.
Hence, the PTY function allows a targeted search
for broadcasts of a certain programme type, e.g.
for rock or sports broadcasts. Note that PTY is not
supported by all stations.
PTY
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", section
"Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
To select a programme type. read the section
"M
aking settings in the "TUNER" menu", menu item
"PTY TYPES" in the chapter "User settings".
Note:
In the reception area "EUROPE", you can adjust the
language in which the programme types are
displayed (see the chapter "User settings",
section "Making settings in the " TUNER"
menu", menu item "PTY LANGUAGE").
Searching for stations
Prerequisite: PTY function is switched on.
Turn the tunning button to search the PTY
programme type.
Note:
• If no station with the selected programme
type is found ,”NO PTY” is briey displayed
and 2 beeps can be heard. The radio will
then return to the station that it played last.
• If the tuned radio station or another station
on the broadcasting network broadcasts your
selected programme type at a later point
in time, the car sound system will automa-
tically switch from the currently tuned
station or from the current audio source
(e.g. USB) to the station whose programme
type matches the one you selected. Note that
this function is not supported by all stations.
Press the DIS button to toggle between the displays:
Conguring the display
Display Meaning
ABCDEF Station name
RADIO TEXT
Radio text, only if
available
P1 FM1 89.90
Memory location/
memory bank/frequency
P1 FM1 08:40
Memory location/
memory bank/time
Radio mode | PTY