10
Function: Timer function
Timer function:
In order to switch charging current,Please make sure the power plug is firmly inserted into
the socket and the plug for EV vehicle is disconnected.
CAUTION
Please complete setting within 4 seconds at each step, otherwise the feature setting will fail.
Notice:
In case you want to cancel the timer setting - you can use one of the two options below:
1. Directly to disconnect the plug from the outlet socket.
2. Press the Time button for 5s.
Step Illustration Statu
1.Insert the plug into the
correct power supply
socket.
2.Press the “Time” switch
button for 2 seconds.
3.Continue to press the
button briefly.The time
will be changed.( Switch
between 1/2/4/6/8/10H )
4.Press the button for 2s
again
Ready
Enter setting the
delay time mode
Setting the delay
time of User’ s
request
Setting successfully
405V
1h 2h 4h
6h8h10h
To Next Page
Loading...
