50
Setting the time manually
➮ In order to adjust the time, press
the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for
“CLOCKSET” to appear in the
display.
➮ Press the button, :.
The time is shown on the display. The
minutes are blinking, and can be ad-
justed.
➮ Adjust the minutes with the or
button, :.
➮ When the minutes have been set,
press the
button, :. The hours
blink.
➮ Adjust the hours with the
button, :.
➮ Press the MENU button, 8, or
OK, ;.
Choosing 12/24 hour clock
mode
➮ Press the MENU button, 8.
“MENU” appears in the display.
➮ Press the or button, :,
as often as is necessary for
“24 H MODE” or “12 H MODE” to
appear in the display.
➮ Press the or button, :, to
switch between the modes.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Having the time displayed
constantly when the device is
switched off but the ignition on
➮ If you want the time to be dis-
played when the device is
switched off but the ignition is
switched on, press the MENU
button 8.
“MENU” appears in the display.
➮ Press the or button, :, as
often as is necessary for “CLK
DISP OFF” or “CLK DISP ON” to
appear in the display.
➮ Press the or button, :, to
switch the display between ON
and OFF.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Displaying the time briefly when
the device is switched off
To display the time briefly when the
device is switched off
➮ press the / DIS button, 7.
The time is shown on the display for
eight seconds.
CLOCK - TIME
To Next Page
Loading...
