36
ADJUSTING THE VOLUME
Adjusting the Volume
The volume can be adjusted in steps
from 0 (off) up to 66 (maximum).
➮ To increase the volume, turn the
volume control, 2, to the right.
➮ To reduce the volume, turn the vol-
ume control, 2, to the left.
Adjusting the Switch-On Volume
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “ON VOL-
UME” to appear in the display.
➮ Adjust the initial volume with the
or button, :.
If you set “0”, then whatever volume was
in use before the device was switched
off will be reactivated.
Risk of serious injury! If the level
of switch-on volume is set to maxi-
mum, the volume when switching on
can be very high.
If the volume was set to maximum
before switching off, and the value
for the switch-on volume is set to “0”,
the volume when switching on can
be very high. This can damage the
hearing!
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Immediate Volume Reduction
(Mute)
You can reduce the volume immediate-
ly (mute) to a level that you have previ-
ously set.
➮ Press button 3 briefly.
“MUTE” appears in the display.
Adjust the muted volume.
The muting volume can be adjusted.
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “MUTE
LEVEL” to appear in the display.
➮ Adjust the mute level with the or
button, :.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mo-
bile telephone or to a navigation sys-
tem, then when the telephone is taken
“off hook”, or when the navigation sys-
tem is giving speech output, the car ra-
dio is muted. The telephone conversa-
tion or the speech output are repro-
duced via the car radio speakers. This
requires the mobile telephone or navi-
gation system to be connected to the
car radio as described in the fitting in-
structions.
Your Blaupunkt dealer can tell you which
navigation systems can be used with
your car radio.
To Next Page
Loading...
