Need help?Do you have a question about the Blaupunkt PARIS RCM 104 and is the answer not in the manual?
General| Type | Car Stereo System |
|---|---|
| Model | PARIS RCM 104 |
| Display | LCD |
| Radio Tuner | FM/AM |
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| SD Card Slot | Yes |
| Equalizer | Yes |
| Cassette Deck | No |
| Removable Front Panel | Yes |
| MP3 Playback | Yes |
| Remote Control | No |
| Channels | 4 |
Adjusting audio volume using VOL+/- and the -dB mute function.
Changing between medium wave (MW) and long wave (LW) frequencies.
Using AF for alternative frequencies and PS/SCA for scanning.
Steps for inserting the KeyCard to operate the unit.
Using Dolby-B noise reduction and tape winding functions.
Details on autoreverse and fast winding operations.
Adjusting seek tuning sensitivity and switching to mono.
Setting balance, fader, and using the loudness function.
Using KeyCard for theft protection indication.
Handling KeyCard errors and procedures for lost cards.
How RDS displays station name and program information.
Using AF and REG for optimal reception and regional programs.
Switching memory banks and storing stations.
Details on seek tuning and mono/stereo modes.
How to recall stations using preset buttons.
Sampling stations with Preset Scan and Radio Scan.
Explains warning beeps and automatic seek tuning for traffic programs.
Adjusting volume for traffic messages and warning beeps.
Details automatic switching to the other track of a cassette.
Using the tape equalisation switch for MTL.
Selecting between radio, cassette, or CD sources.
Recommendations for cassette tape and unit maintenance.
Naming CDs and selecting display modes (NAME, TIME, NUMBER).
Adjusting display brightness and setting LED ON for theft protection.
Adjusting sound for speech programs and initial volume.
Deleting CD names and exiting the DSC programming mode.
Selecting CDs/tracks and sampling CD tracks.
Using MIX CD, MIX MAG, and turning MIX OFF.
Managing CD names, updating, and loading magazines.
Survey of the default values for DSC settings.
To Next Page