EasyManua.ls Logo

Blaupunkt PARIS RCM 104 - Volume Control and Basic Tuning; Volume and Mute Adjustment; Waveband Selection

Blaupunkt PARIS RCM 104
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Paris RCM 104
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAOL
SVENSKA
FRANÇAIS
4 M•L
To change between medium wave
(MW) and long wave (LW) frequencies.
5 -dB - for instantly changing the volume
Press the -dB button to instantly mute
the audio source. The display will then
show MUTE. Return to normal volume
by pressing either the -dB button once
again or the VOL+ button.
When pressing VOL-, the normal volu-
me will be identical to the -dB (muted)
volume.
To program the mute volume, proceed
as follows:
Adjust the desired volume.
Press -dB for approximately 2 se-
conds (beep tone is released).
Diese Lautstärke ist als Mute-Lautstär-
ke gespeichert.
This volume will then be stored as the
mute volume.
Extra function:
Press this button to store the values set
in the DSC menu.
Short description
1 Switching on:
Press ON (the KeyCard has to be in-
serted), the set plays with the pre-adju-
sted volume.
Switching off:
Press ON for approximately 1 second.
If the set was turned on by pressing
ON, the KeyCard can be used for swit-
ching the system on and off (KeyCard =
passive anti-theft protection).
The set may also be turned off via the
vehicle’s ignition (provided that it was
connected correspondingly). After the
ignition was switched off, a double
beep tone reminds you that you should
remove the KeyCard before leaving
your vehicle.
To operate the set when the ignition is
switched off (KeyCard is inserted), pro-
ceed as follows:
Press ON approximately 8 seconds
after the ignition was switched off. The
set will be turned on.
To protect the battery, the system will
automatically shut off after a playing
time of one hour.
2 To change the volume:
Press VOL+/VOL-.
Each time the set is switched on, it will
play with the pre-adjusted volume (VOL
FIX). You may also change the VOL
FIX setting (see chapter “DSC pro-
gramming”).
3 FM
T
Press this button to change the wave-
band or memory bank in the following
order:
Change from MW/LW to FM. If FM is
already activated, this function will be
skipped.
Switch between the memory banks I
and II.
Activate the Travelstore memory
bank
Extra function:
Store the six most powerful stations
automatically with Travelstore:
Press FM
T until the search starts on
the display.

Related product manuals