Battery charging: The unit will start charging after connection with DC power, and the power
LED on rear panel will turn to green color in case of be fully charged. You can understand the
battery power status by check the battery icon on the right top corner of display. The unit will
off automatically in case of exhausted battery power. Please kindly arrange re-charging for
playing.
Unit power on and standby: Press the power button in 2 seconds on the top panel of unit to
power on/off the unit. Short press the power button from top panel or remote control can
standby on/off the unit (clock time interface on display without sound output). The display will
light up after power on, and then you can start other operation.
Notes:
a. The supplied USB power cable includes universal USB connector and micro USB connector.
The universal USB connector is for DC adapter connection, and the micro USB connector is
for DC power USB jack connection.
b. Only the supplied power adapter or same rating spec adapter is allow to use for power
operation.
c. When you press off power by the power button on top panel, then the unit cannot power on
by remote control due to the power is cut off completely. Please press the power button on
top panel to power on the unit again.
d. The unit can play audio during charging, we suggest to power off(display off ) the unit for
charging in case of fully charge the battery in once.
Display back-light adjustment (dimmer)
Press the “ LIGHT” button on remote control can adjust the display back-light brightness
between high/middle and low level.
Volume adjustment: press and hold previous & next button on top panel to increase or
decrease the volume level in high speed; if you short press the previous & next button
immediately, there will adjust the volume output level step by step; remain the button 3
seconds without further operation, the previous & next button will resume for last & next track
selection function.
Time operation
Clock time: Power on the unit, then short press the power button again enter to clock time
interface. Short press the mode button 3 times continuous to start the setting, and the hour's
digits will flare on display; press the previous/next button to adjust the hour; press the clock
button skip to minute's setting, or press clock button again return to hour's setting in case of
need; press the previous/next button to adjust the minute, and short press the power button to
complete the clock setting.
ENGLISH
9
PP6BR
To Next Page
Loading...
