Need help?Do you have a question about the Blaupunkt Rio RCR 87 and is the answer not in the manual?
General| Model | Rio RCR 87 |
|---|---|
| Power Output | 4 x 50W |
| Radio Tuner | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| Equalizer | Yes |
| Tuner type | Digital |
| Radio bands supported | FM, AM |
| Audio formats supported | MP3, WMA |
| Output power | 4 x 50W |
| CD Player | No |
| MP3 Playback | Yes |
| Type | Car Stereo |
| Pre-out ports | 2 |
Controls powering the unit on and off, including ignition-controlled operation and mute function.
Adjusts the audio volume using the '+' and '-' buttons for playback.
Allows manual and automatic radio tuning, and switching between FM, MW, and LW bands.
Switches between radio and tape playback modes using the SRC button.
Stores up to five radio stations on memory banks for quick recall.
Manages traffic announcement priority and automatic frequency selection for RDS.
Shows the current station name and cassette track/side information.
Displays status for Loudness, seek tuning, AF, TA, and manual tuning modes.
Controls fast forward (FF) and fast rewind (FR) for cassette tapes.
Instructions for inserting a tape and ejecting the cassette.
Press the REL button to detach the control face for security.
Guides on how to re-attach the control face to the unit.
General advice for reading information before using the car radio.
Emphasizes driver responsibility and avoiding distractions while driving.
Advice on proper installation, power connection, and speaker outputs.
Recommends using only Blaupunkt approved accessories and amplifiers.
Switching between radio and tape modes using the SRC button.
Explains RDS benefits like station naming and automatic frequency selection.
Automatically finds the strongest frequency for the current program.
How to switch between FM, MW, and LW frequency bands.
Methods for automatically seeking or manually tuning radio stations.
Adjusting how sensitive the radio is to picking up stations.
Switching between different memory banks (I, II, T) for storing stations.
Procedure for saving radio stations to preset buttons.
How to retrieve saved radio stations using preset buttons.
Manually switching between stereo and mono reception modes.
Enhances low frequencies at low volume levels for better sound.
Understanding RDS-EON for exchanging traffic information between stations.
Activating priority for traffic announcements (TA) to interrupt normal playback.
Alerts for leaving reception areas or pressing unassigned preset buttons.
System automatically seeks new TA stations when leaving coverage area during tape play.
Setting a specific volume level for traffic announcements.
Procedures for loading a cassette and ejecting it from the player.
Using FF and FR buttons for fast forward, fast rewind, and tape reversal.
Enables automatic switching to the other side of the tape.
Recommendations for storing and cleaning cassette tapes to ensure optimal playback.
Details amplifier output power, tuner wavebands, sensitivity, and frequency response.
Provides contact information for finding the nearest service centre in Germany.
To Next Page
