RX+45e
24. The only means of completely disconnecting the product from the power supply is by
removing the power cord from the wall outlet or the product. The wall outlet or the power
cord entry to the product must remain freely accessible at all times while the product is in
use.
25. Try to install the product near a wall socket or extension cord and shall be easily
accessible.
26. The highest environmental temperature suitable for this product is 35°C.
27. ESD hints - The product maybe reset or not reset to operation of control due to
electrostatic discharge, just switch off and reconnect again.
ERP2 - (Energy related products) note
This product complies with the European Commission on Ecodesign Directive and its
implementing Regulations Energy related products because the unit works with low
voltage and current external power supplier. You can reference the regulation on EC No.
1275/2008 for details.
38
To Next Page
Loading...
Need help?
General
