RX+45e
Setting the Alarm
Note: Check that the radio has the correct time and date from the DAB signal before you
set an alarm.
1. Press and hold the ‘Alarm/Sleep/Snooze’ button to enter alarm mode.
2. ‘Alarm Status’ will be displayed and ‘ON’ or ‘OFF’ will flash on the second line of the
display. Use the right hand rotary control to change the display to ‘ON’ or ‘OFF’ as required
and press the right hand rotary control to confirm.
3. If you have selected ‘ON’ in step 2 above, the ‘Hour’ for the alarm will flash. Use the right
hand rotary control to display the correct hour for your alarm in 24 hour clock and press
the right hand rotary control to confirm.
4. The minutes for the alarm will flash. Use the right hand rotary control to display the
correct minutes for your alarm and press the right hand rotary control to confirm.
5. The alarm type will now flash. Use the right hand rotary control to choose from Beeper,
DAB and FM. Press the right hand rotary control to confirm.
6. The alarm volume will now be displayed. Use the right hand rotary control to set the
alarm volume and press the right hand rotary control to confirm.
7. The alarm mode will now flash. Use the right hand rotary control to choose from Once,
Daily, Weekdays or Weekends. Press the right hand rotary control to confirm.
In Standby mode a bell icon will be displayed on the bottom right of the display to
confirm that an alarm has been set.
Note: If you have selected ‘DAB’ or ‘FM’ for your alarm, please check that you have set an
alarm volume level that will wake you up.
Stop the Alarm
When the alarm sounds press the ‘Standby’ button on the top of the radio. Alternatively,
you can press ‘Alarm/Sleep/Snooze’ on the top of the radio.
Turn off the Alarm
Follow steps 1 and 2 in ‘Setting the Alarm’ and select ‘OFF’ in step 2.
Snooze function
When the alarm sounds, you can press the ‘Alarm/Sleep/Snooze’ button on the top of the
radio. ‘z’ will be displayed in the bottom right of the display and the alarm will sound
again in approximately 5 minutes.
Sleep timer
You can set your radio to turn off automatically using the sleep timer. You can choose from
15, 30, 45, 60 and 90 minutes or OFF.
1. Press the ‘Alarm/Sleep/Snooze’ button on the top of the radio.
2. Use the right hand rotary control on the top of the radio to scroll to the sleep time you
would like (15, 30, 45, 60 or 90 minutes). Press the right hand rotary control to confirm. An
‘S’ and the number of minutes you have set (eg: S15), will appear in the top right of the
display to confirm that your sleep timer has been set.
3. To cancel the sleep timer function, press the ‘Alarm/Sleep/Snooze’ button and use the
right hand rotary control to scroll to ‘OFF’ and press the right hand rotary control to
confirm.
47
To Next Page
Loading...
Need help?
General
