RX+45e
Note: If no FM station has been stored under the preset button, ‘Preset X empty’ will be
displayed, where ‘X’ is the number of the preset location, then the radio will revert to the
previously selected radio station after a few seconds.
FM display information
When listening to an FM station you can change the information that will appear on the
second line of the display. There are several different types of information that are sent by
the broadcaster.
Radiotext (RT)
This is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or music title, Dj’s name, contact details for the radio station etc.
Program Type (PTY)
Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
Signal strength
The information provided gives details of the signal strength you are receiving. An empty
will appear on the second line of the display to indicate the minimum signal strength for
acceptable listening. The row of solid rectangles indicate the actual signal strength that
you are receiving. The stronger the signal, the further to the right the row of solid
rectangles will be.
Time and date
Supplied by the broadcaster.
Frequency
Such as 93.30MHz
Audio mode
The radio will automatically switch between Stereo and Mono, depending on the quality
of the signal being received.
Repeatedly press the ‘Info’ button on the top of the radio to cycle through the different
information options.
46
To Next Page
Loading...
Need help?
General
