Make sure to leave a 5mm gap between the
wall and the screw's head. Lift the Bar over the
heads of the screws and slot into place.
430mm
430mm
1
Drill two parallel holes in the wall.
2
Firmly fix a dowel (included) into each hole in the
wall if necessary. Insert a screw (included) into each
dowel. Make sure to leave a 5mm gap between the
wall and the screw's head.
Solid wall(i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
Dowels
3
Lift the soundbar over heads of screws and
slot into place.
9
2.0 SOUNDBAR
To Next Page
Loading...
