1. Connect the Digital Optical Audio cable to the optical
output on the audio source and to the OPTICAL IN on
the soundbar.
2. Press the OPT button on your remote control directly
to switch to Optical Mode or one touch Source button
on main unit repeatedly to select the Optical mode.
3. Using the native controls on your connected device,
make sure the audio settings are set to Optical Audio
and are turned On.
4. Audio from the connected audio source will now be
played through the speakers.
Using the Optical input
AC 110-240VOPTICAL
USB
HDMI(ARC)
6
2.0 SOUNDBAR
To Next Page
Loading...
