Blaupunkt Skagen 370 DAB BT - Page 20

DURBAN224 DAB BT 22.05.19 17:00
5 5
ENGLISH
Volume
Adjusting the volume
Adjusting the Microphone Gain
Note:
If a telephone is connected with the car sound
system as described in the installation instruc-
tions, the car sound system is muted in case
of a phone call. During muting, the display
shows "TELEPHONE".
You can adjust the volume in steps from 0(o) to
50 (maximum).
Turn the volume control to change the volume.
Briey press the MIC button to access to
Microphone mode.
Muting the car sound system (Mute)
Long press the MIC button and display
show MIC GAIN.
Rotary the tuning button to change the
MIC gain level.
Briey press the tuning button to conrm
setting.
Briey press On/O button to mute the car
sound system or to reactivate the previous
volume.
While it is muted, the display shows "MUTE".
DAB mode
With DAB, you can enjoy radio in digital
sound quality.
In contrast with standard radio broadcasting,
several programmes (services) are always
broadcast over the same frequency for DAB.
These services are combined into a so-called
ensemble. In some cases, the same service can
be received in dierent ensembles.
Note:
You will need a special DAB antenna to
be able to receive DAB signals. This can
be a separate DAB roof/window antenna
or a DAB/AM/FM combination antenna.
Below model with DAB function:
DENVER 212 DAB BT 200101800002
DURBAN 224 DAB BT 200101800001
Changing to DAB mode or selecting
a DAB memory bank
Press the SRC button repeatedly until the
desired DAB memory bank is displayed:
DAB1
DAB2 DAB3
If DAB mode is switched on, the display
showsthe symbol
Notes:
• Up to 5 services can be stored in each DAB
memory bank.
Tuning into ensembles/services
With DAB, several services broadcast over
the same frequency are always combined
into an "ensemble".
Selecting an ensemble
You can directly select ensembles that you have
received once already (for this to work, the ensem-
ble must be receivable).
Briey press the MENU button then rotary
tuning butont to choose ensemble selecting
item.
Briey press the tuning button to conrm
and then turn to select ensembles.
Note:
With activated PTY function, the next service
with the currently selected programme type
is set (see the section "DAB-PTY" in this chap-
ter).
ENGLISH
Trac information
In the reception area "EUROPE", an FM station can
identify trac reports by means of an RDS signal.
If priority for trace reports is swiched on, a trac
repor t is automatically switched through, even if
the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
trac jam symbol ( ).
"TRAFFIC" is displayed during a switched-through
trac announcement.The priority is activated and
deactivated in the user menu (see the chapter
"User settings", section "Making settings in the
"TUNER" menu", menu item "TRAFFICINFO").
Note:
The volume is increased for the duration of the
switched-through trac announcement. You can
adjust the minimum volume for trac announce-
ments (see the chapter "User settings", section
"Making settings in the "VOLUME" menu", menu
item "TRAFFIC VOL").
To cancel a switched-through trac announce
-ment, press the SRC button.
Volume | DAB mode