Blaupunkt Skagen 370 DAB BT - Page 21

DURBAN224 DAB BT 22.05.19 17:00
6 6
Briey press the tuning button to conrm
service selection and then turn to select
service.
Turn tuning button to choose ensemble
search and then briey press to start the
search for an ensemble.
Ensemble seek tuning
You can nd new ensembles using seek tuning.
The seek tuning stops if an ensemble is being
received. The rst available service in the
ensemble is played.
Selecting a service
After you have tuned into an ensemble, you can
select a service from the ensemble.
Select the desired DAB memory bank.
If necessary, set the desired service.
Press the station button 1-5 for approx. 2
seconds to store the current service under the
button
-or-
Briey press the station 1-5 to call up the
stored service.
Saving a service or calling up a saved
service
Press the SRC button for approx.2 seconds
to start scanning.During the scanning, "SCAN"
and the current service name are inter-
mittently shown on the display.
Briey press the SRC button to continue
listening to the service that is currently being
scanned.
Scanning services
You can use the scan function to play all the
receiveable services briey.
Refreshing services received
To update the received service, read the section
"Making settings in the "DAB TUNER" menu", menu
item "SERVICE SCAN" in the chapter "User settings".
Switching between DAB and FM
You can select various settings for switching
between DAB and FM radio mode. Switching
may become necessary if the reception quality in
the DAB or FM mode drops signigicantly.
Note:
• The PTY function is only available if it has
been activated (see the chapter "User
settings", section "Making settings in the
"DAB TUNER" menu", menu item "PTY").
DAB-PTY
You can select a programme type with the PTY
function to purposefully search for services, for
example, that broadcast rock music or sport events.
Turn the Tuning button.
During the seek tuning, the currently
selected programme type is shown on
the display. As soon as a service with
the desired programme type is found,
it remains being tuned into.
Note:
Selecting a programme type
To select a programme type, read the section
"Making settings in the "DAB TUNER" menu",
menu item "PTY TYPE" (programme type) in the
chapter "User settings".
Searching for service
Press the button DIS to toggle between
these displays
.
Switching the display
• If no service with the selected pro-
gramme type is found,”PTY NONE” is
briey displayed and 2 beeps can be
heard. The radio will then retune to
service that it played last.
Display Meaning
ABCDEF
DLS mode
Service name
ABCDEF Ensemble name
Dynamic Label Service
DAB1 5C
or
P1 5C
DAB memory bank/
frequency
or
Memory location/frequency
DAB1 18:30
or
P1 18:30
DAB memory bank/time
or
Memory location/time
DAB mode