EN
3
2. Technical Specifications
Power Supply Features:
• Input: AC 100-240V~50/60Hz 0,15A
• Output: DC 5V – 1A
Battery and Voltage: 2100mAh - 3,8V
SAR value: 0,319W/Kg (Head) - 1,770W/Kg (Body)
The mains power socket used must be close to the charger/holder and
easily accessible, so that it can be used as an on/off facility.
3. Insert the memory card and SIM card
Turn off the power and remove the back cover and battery. Insert the SIM
card according to the mark on the device. Make sure that the chip contact
and the cut edge of the card are aligned in the correct direction. Slide the
card into the slot until it stops. The device handles Nano SIM + Micro SIM +
Micro SD cards.
4. Switch the device on and off
Press and hold the Power button to turn on the power.
Press and hold the power button and select “Power off” from the Options
menu.
5. Using the Phone’s Buttons
To Next Page
Loading...
