3. Insert the memory card and SIM card
Turn off the power and remove the back cover. Insert the SIM card according to
the mark on the device. Make sure that the chip contact and the cut edge of the
card are aligned in the correct direction. Slide the card into the slot until it stops.
The device handles Nano SIM + Nano SIM + Micro SD cards.
4. Switch the device on and off
Press and hold the Power button to turn on the power.
Press and hold the power button and select “Power off” from the Options menu.
5. Description of device
1 – USB Port
2 - Earphone
3 - Main camera
4 - Sub-camera
5 - Flash light
6 - Volume+
7 - Volume-
8 - Power Key
6. Emergency calls
You can also make emergency calls without a SIM card. For more information,
contact your network service provider.
7. Handling and maintenance
7.1 Battery
• The device has a rechargeable battery. When the power supply is low, charge
the battery.
• Disconnect the charger from the power outlet and the appliance when not in
use. Do not allow the battery to charge for more than a week, as it may reduce
the battery life.
To Next Page
Loading...
