EasyManuals Logo

Blaupunkt VALENCIA MP34 User Manual

Blaupunkt VALENCIA MP34
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
42
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
Press the MENU button 8.
Press the or button 7 re-
peatedly until “SENS” appears in
the display.
Press the button 7.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
Set the sensitivity level that you
want using the buttons 7.
When you have finished making your
changes,
press the MENU button 8.
Note:
You can set different sensitivity lev-
els for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
Tune into the station that you want.
Press and hold down one of the
station buttons 1 - 6 9 for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are de-
leted in the process.
Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
Select the memory bank or wave-
band.
Press the station button 1 - 6 9
that corresponds to the station that
you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations. You can
set the scanning time in the menu to
between 5 and 30 seconds.
Starting SCAN
Press and hold down the MENU
button 8 for longer than two sec-
onds.
RADIO MODE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blaupunkt VALENCIA MP34 and is the answer not in the manual?

Blaupunkt VALENCIA MP34 Specifications

General IconGeneral
BrandBlaupunkt
ModelVALENCIA MP34
CategoryCar Receiver
LanguageEnglish

Related product manuals