Blaze BLZ-4LTE2MG - Warranty Information

Blaze Outdoor Products Instructional Book
Page | 4
THIS MANUAL APPLIES TO THE FOLLOWING BLAZE GRILLS
Model: BLZ-4LTE2MG / 4 BURNER
Cutout Dimensions
30 5/8”W x 21 1/4”D x 8 1/2”H
*These dimensions create the required air gap underneath this
appliance. This air gap serves multiple purposes, such as preventing a
build-up of heat in the island cavity and helping provide proper airflow
for combustions and/or cabinetry.
BTU Output
14,000 BTU per Burner x4
Infrared Back Burner
10,000 BTU
Total BTU
66,000
Primary Ignition
Push N’ Turn Flame Thrower
Secondary Ignition
Flash Tube
Cooking Grid
Dimensions
29 1/2" X 17 7/8"
Total Cooking Area
740sq.in
(includes warming rack)
Flame Tamer
Flame Stabilizer Grid
Zone Cooking
Removable Heat Zone Separators
Rotisserie Kit
(Motor & Forks)
Optional
Burner
Commercial Quality Cast Stainless Steel
Gas Type
Each grill contains an NG/LP Orifice Kit
Warranty
In addition to the parts
warranty found below, Blaze Outdoor
Products will cover up
to $120 in labor per warranty claim in a
30
-day period for the first 365 days from purchase date. (Blaze
will not reimburse for any diagnostic charges). Please call our
customer service department for help diagnosing the issue
before calling a service prov
ider.
*Limited Lifetime
– Defects in manufacturing and
workmanship. Cooking grids, Flame Tamers, Heat
Zone
Separators, Stainless Housing, Valves, and Stainless
B
urners against rust- through.
*1 Year
– Ignition Components, Electronics and Lighting
systems
*Appliances must be registered within 30 days of purchase to
validate this warranty.
*See warranty section for details.