Outer Sensor Installation
Outer Sensor Installation Steps
Each sensor has a unique ID code. Please make
sure sensor installed on corresponding tire valve.
Note: When spin the sensor to tight, please open
the APP in cellphone (Choose Auto Pair) and
Press “Search” button at the same time to
finish sensor bind shortly.
1. Remove tire
valve cap, put
in Anti-theft
screws
2. Install outer
sensor on tire
valve in order
3. Hold the sensor,
tighten Anti-
theft screw
Left up
①
③
②
④
Installation Diagram：
Left Down
Right up
Right Down
Corresponding sensor silkscreen indication
To Next Page
Loading...