Need help?Do you have a question about the Blick APG2 and is the answer not in the manual?
Instructions for ensuring the battery is new or fully charged before first use.
Step-by-step guide on how to open the battery compartment and replace the battery.
How to switch the pager on and off using the power button.
Explains the role of the function button in accessing user selectable functions.
Describes how to use the message button for message review and call cancellation.
Step-by-step process to power on the pager by pressing and holding the power button.
Procedure to press and hold button f to display and change the Individual Code.
How to add, change, or delete Group Codes (GC) by pressing and holding button f.
What happens when the pager receives a call, including bleeps and vibration.
What the "LOW BATT" display means and the required action.
How the pager indicates it is out of transmitter range for more than 40 seconds.
How to review all stored messages in sequence and delete them.
Procedures for setting engineering functions for system operation.
Cautionary note about unsure settings and potential invalid configurations.
Steps to press and hold button f to display the Individual Code and initiate deletion.
How to send a DELETE ALL programming code from the system encoder.
How to send a programming call for the required Individual Code after changing format.
Details on the FORMAT engineering function and its importance for system compatibility.
To Next Page
General