Need help?Do you have a question about the Blick APG1 and is the answer not in the manual?
Details the safety classification and zone for the pager.
Specifies temperature rating and IP rating for the pager.
Explains how to follow the guide and use the information column.
Ensures the battery is new or fully charged before initial use.
Step-by-step instructions for inserting or replacing the pager's battery.
Procedure to power down the pager using the dedicated power button.
Procedure to power on the pager by pressing and holding the power button.
Explains the function and message buttons for navigation and control.
How the pager indicates receipt of a call with bleeps and vibrations.
Allows sequential review of all stored messages with an option to delete all.
Allows individual review and deletion of specific stored messages.
Steps to enter the mode for changing user-selectable functions.
Option to silence incoming call bleeps, displaying a notification instead.
Selects between block or individual message review methods.
Allows joining or leaving programmed user groups.
Initial step to prepare the pager for configuration.
Enables a feature that alerts the user if out of transmission range.
Prevents the pager from being switched off.
Process of selecting available pager functions.
Procedure to enter or change pager identity codes.
Diagnostic mode for receiving and displaying call data.
To Next Page
General