2 3
Contents
Introduction 4
How to use this guide 5
To prepare your pager for use 5
To insert (or change) the battery 5
Pager Controls 6
To switch your pager on 6
To reprogram your pager with identity codes, Individual (IC) or Group (GC) 7
To use your pager 9
To receive paging calls 9
To change the top display orientation when in a charging rack 9
Low battery 10
Out of range 10
To review and delete stored messages 10
Block message review 10
Individual message review 11
User selectable functions 12
To configure your pager 13
To replace the clip 20
Glossary of paging terms 22
APG7 INTRINSICALLY SAFE PAGER
LIMITATIONS OF USE
This page contains BASEEFA related information. No alterations are permitted without reference
to the BASEEFA liason officer
THE APG7 SERIES OF MOBILES ARE INTRINSICALLY SAFE AND MUST NOT BE MODIFIED
WITHOUT PRIOR PERMISSION FROM THE CERTIFYING BODY.
Classification Category 1
Rating ia, zone 0
Temperature rating.: See below
(Suitable for all gas/air flammable mixtures except carbon disulphide)
IP rating (protection level against the ingress of dust and liquid) 53
Main case material ambient temperature range -20°C to +40°C
The polycarbonate material used to manufacture the main case together with the natural leather
pouch have been selected to protect the equipment against damage, e.g. being dropped or
knocked, during normal operation.
These units contain no user serviceable parts, other than the battery. Units must be returned to
the factory for servicing
Important: The pager must be fitted into its leather pouch when used in hazardous areas
Type: APG7*-D.
Battery option, alkaline,
Blick Pt.No. 151015 must be fitted
Temperature rating: T4
Type:APG7*-R
Battery option, NiMH,
Blick Pt.No. 151026 must be fitted
Temperature rating T3
To Next Page
Loading...