J
Joseph GrahamAug 6, 2025
What to do if the dewpoint indicator is in the red area on my Blitz Dehumidifier?
- CChristina WeeksAug 6, 2025
If the dewpoint indicator on your Blitz Dehumidifier is in the red area, it could be due to several reasons: * Refrigerated compressed air dryer overload. * Ambient temperature being too high. * High air inlet temperature. * Volumetric flow rate being too high. * Low refrigerant charge. * Defective refrigerant compressor (K201). * Defective fan motor (N204). * Defective pressure switch (P220). * High level of dirt content in the compressed air, resulting in deposits in the compressed air system. Check the design specifications. Trained staff should check and repair if there is low refrigerant charge, defective refrigerant compressor, fan motor, or pressure switch. Also, clean the compressed-air system with suitable cleansing agents.
