Blitz HydroLift Series - Page 114

HydroLift
Maintenance
126746 111
11.10 Permitted hydraulic oils
◼ For the hydraulic system, only use hydraulic oils according to DIN 51524.
◼ The water content of the hydraulic oil must not exceed 2%.
◼ Do not mix different types of oil.
◼ Oils and greases are substances hazardous to water. Always dispose of in
an environmentally sound manner, according to the provisions in force in
your country.
Hydraulic oils with a viscosity of 22 cSt at 40° C are permissible.
The following oils may be used.
ARAL:
Vitamin
MOBIL OIL:
Mobil D.T. E
BP:
Energol HLP 22, HLP – D 22
SHELL:
Hydrol DO 22
ESSO:
ESSTIC 22, Nuto H22
TEXACO:
RandoOil 22,
FINA:
Hydran 22, Circan 22
VALVOLINE:
ETC
FUCHS:
Renolin MR, Renolin B
VEDOL:
Andarin 22
11.11 Torque table for screws
Tightening torque (Nm) for screws
Strength class 8.8
0.10*
0.15**
0.20***
M8
20
25
30
M10
40
50
60
M12
69
87
105
M16
170
220
260
M20
340
430
520
M24
590
740
890
Strength class 10.9
0.10*
0.15**
0.20***
M8
30
37
44
M10
59
73
87
M12
100
125
151
M16
250
315
380
M20
490
615
740
M24
840
1050
1250
* Sliding friction coefficient 0.10 for very good surface, lubricated.
** Sliding friction coefficient 0.15 for good surface, lubricated or dry.
*** Sliding friction coefficient 0.20 Surface black or phosphated, dry.