What to do if my Blizzard Lighting Stiletto 6 has no power?
If your Blizzard Lighting Flood Light isn't powering on, begin by inspecting the fuse, AC cord, and the circuit to identify any potential malfunctions.
Why is my Blizzard Lighting Stiletto 6 responding erratically?
If your Blizzard Lighting Flood Light is not responding or responding erratically, ensure all connectors are properly and securely seated. Use only DMX cables. Install a terminator. Check all cables for defects. Reset the fixture.
What to do if my Blizzard Lighting Stiletto 6 has no light output?
If your Blizzard Lighting Flood Light has no light output, ensure that the fixture is operating under the correct mode, such as sound active, auto, or DMX, if applicable. Contact service for more information.
Why does my Blizzard Lighting Stiletto 6 automatically shut off?
If your Blizzard Lighting Flood Light is automatically shutting off, it might be due to high heat. Check the fan in the fixture and clear any obstructions. If the issue persists, consider returning the unit for service.
How to fix a dim beam on my Blizzard Lighting Flood Light?
If your Blizzard Lighting Flood Light's beam is dim, inspect the optical system and clean any excess dust or grime. Also, ensure that the 220V/110V switch is in the correct position, if applicable.
What to do if my Blizzard Lighting Stiletto 6 has no response to audio?
If your Blizzard Lighting Flood Light is not responding to audio, first verify that the fixture is in “Sound Active” mode. Then, adjust the audio sensitivity, if applicable.
General| Brand | Blizzard Lighting |
|---|---|
| Model | Stiletto 6 |
| Category | Flood Light |
| Language | English |
To Next Page
