To Next Page
E
Ellen HarrisAug 12, 2025
What to do if Blizzard Lighting Flood Light has no power?
- JjonathanwilliamsAug 12, 2025
If your Blizzard Lighting Flood Light has no power, check the fuse, AC cord, and the circuit for any malfunctions.
What to do if Blizzard Lighting Flood Light has no power?
If your Blizzard Lighting Flood Light has no power, check the fuse, AC cord, and the circuit for any malfunctions.
Why is my Blizzard Lighting Flood Light fixture not responding or responding erratically?
If your Blizzard Lighting Flood Light fixture is not responding or responding erratically, ensure all connectors are properly and securely seated. Use only DMX cables, install a terminator, check all cables for defects, and reset the fixture(s).
What to do if my Blizzard Lighting Flood Light keeps blowing fuses?
If your Blizzard Lighting Flood Light's fuse keeps blowing, inspect the AC cord and circuit for any damage. Also, verify that moving parts are not restricted and that the unit’s ventilation is not obstructed.
What to do if my Blizzard Lighting Flood Light has no light output?
If your Blizzard Lighting Flood Light has no light output, ensure the fixture is operating under the correct mode, such as sound active, auto, or DMX, if applicable. Contact service for more information.
Why does my Blizzard Lighting Flood Light fixture auto-shut off?
If your Blizzard Lighting Flood Light fixture is automatically shutting off, it might be due to high heat. Check the fan in the fixture. If the fan is stopped or moving slower than normal, the unit may have shut itself off due to high heat. Clear any obstructions from the fan, or return the unit for service.
Why is the beam dim on my Blizzard Lighting Flood Light?
If the beam on your Blizzard Lighting Flood Light is dim, check the optical system and clean any excess dust or grime. Also, ensure that the 220V/110V switch is in the correct position, if applicable.
What to do if my Blizzard Lighting Flood Light is not responding to audio?
If your Blizzard Lighting Flood Light is not responding to audio, verify that the fixture is in 'Sound Active' mode. Adjust the audio sensitivity, if applicable.
Why is the movement slow on my Blizzard Lighting Flood Light?
If the movement is slow on your Blizzard Lighting Flood Light, verify that the 220V/110V switch is in the correct position, if applicable. Also, check that the speed channels are set appropriately.
General| Beam Angle | 25° |
|---|---|
| Housing Material | Aluminum |
| LEDs | 12 x 10W RGBW LEDs |
| Control | DMX512, Standalone, Sound Active |
| DMX Channels | 4/5/9/10 |
| Power Supply | 100-240V, 50/60Hz |
| IP Rating | IP20 |
