Using conditions:
Applicable water source: applicable for municipal water or other potable water,
PH between 6.5~8.5, from a filtered Soft water supply
Enter water pressure: 0.2~0.4Mpa (Rate of flow≥4L/min)
Enter water temperature: 0~40℃
Input voltage: ~220-240V±10%
Humidity: 10~60% (non condensing)
Ambient temperature: 5~40℃
Applicable Models:
AF10
Index
I. Safety instruction
II. Structure
III. Indicator display board description
IV. Working principle
V. Installation instruction
VI. Operation instruction
VII. Periodic inspection
VIII. Maintenance
IX. Specification
X. Error code and trouble shooting
XI. Electrical schematic diagram
To Next Page
Loading...