25 / EN
Fully Automatic Coffee Machine / User Manual
2
1
Press steam nozzle icon and
wait for steam nozzle to be
ready. While steam nozzle
is pre-heating, the indicator
lights will flash.
When the indicator lights
are still, steam nozzle is re-
ady for use. Place a milk fil-
led cup or pitcher under the
steam nozzle. Press the ste-
am nozzle button again for
starting the milk frothing, and
stop by pressing again.
Pour the hot frothy milk onto
the espresso. You can now
enjoy your coffee!
• After using the steam nozzle, please clean the nozzle of milk
residue by wiping the nozzle with the wet cloth.
• It is recommended to remove any milk residue that may
accumulate on the tip of the nozzle by activating the hot water
function from the nozzle.
• After steam nozzle is ready, if steam nozzle is not used for a
certain amount of time; the screen will revert back to idle stage.
5 Operation
Steam nozzle can be rotated towards the right
for easier handling purposes.
To Next Page