To Next Page
C
Cassandra CollierAug 4, 2025
What to do if the latch mechanism is not working on my Blomberg BWOS 30100?
- JjaniceguerreroAug 4, 2025
If you're experiencing issues with the latch mechanism on your Blomberg Oven, several factors could be at play. It might be due to a faulty latch motor, which would require replacing the motor. Alternatively, a defective latch micro switch could be the culprit, necessitating its replacement. In self-clean mode, the door micro switch may break when the door is locked, in this case you should replace the door micro switch. Also, bad connections can cause this problem, so you should check the motor and micro switch connections.
General
