EN
13
28. Check that door opens and
closes easily, it is aligned correctly and
there are no gaps allowing air into the
cabinet. If there are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
the door using fingers.
29. Check that all the hinge screws
are tightened. Avoid over tightening
the screws.
30. Put all items, fittings back in the
appliance.
31. Wait for at least 4 hours to allow
the system to settle before switching
on.
32. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.
To Next Page
Loading...
