Blomberg LDF42240W - 6 Maintenance and Cleaning; Cleaning the Outer Surface of the Product; Cleaning the Interior of the Machine; Cleaning the Filters

32
Dishwasher / User manual
/44 EN
Maintenance and cleaning
6
Cleaning the filters
Clean the lters at least once a week
in order for the machine operates
efciently. Check if food residues are
left on the lters. If there are food
residues on lters, take them out and
clean well under running water.
1. Turn the micro filter (1) and
coarse filter (2) assembly counter
clockwise and pull it out from its
seating.
2. Pull out the metal/plastic filter (3)
from the seating.
3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly.
Service life of the product extends and
frequently faced problems decrease if
it is cleaned at regular intervals.
A
Unplug the product and turn
off the tap before attempting
any cleaning procedures.
C
Do not use abrasive
substances for cleaning.
C
Clean the lter and impellers
at least once a week in order
for the machine operates
efciently.
Cleaning the outer surface of
the product
Wipe the outer surface and door
gaskets of the product gently with a
mild cleaning material and damp cloth.
Wipe the "Control panel" only with a
slightly damp cloth.
Cleaning the interior of the
machine
• Clean the interior of the machine
and the tank by running a
programme with or without
detergent based on the degree of
soil.
• If water has remained in the
machine, drain the water by
performing the procedures
under the topic "Canceling a
programme". If the water cannot
be discharged, remove the lters
as specied in the "Cleaning the
lters" section and check if there
are any leftover deposits that have
accumulated at the bottom of the
machine, blocking the water path.
Clean if necessary.