To Next PageTo Next PageWhat to do if my Blooming Toilets unit does not operate at all?
If your Blooming Toilets unit isn't working, there could be a few reasons. First, press any button to check if the power is off. If that doesn't work, check the power plug to ensure it's properly connected. Lastly, check for a power failure in your home.
Why is the water pressure low on my Blooming Toilets?
If you're experiencing low water pressure with your Blooming Toilets, it might be due to a couple of things. First, check if the water pressure level is set to “Low” and adjust it accordingly. Also, the water strainer might be clogged, so try cleaning it.
What to do if there is no water spray from my Blooming NB-1360E Toilets?
If your Blooming Toilets isn't spraying water, there are a couple of things to check. First, make sure the shut-off valve is open. Also, check to see if there is a water supply outage in your area.
Why is the cleansing, bidet, and dry function not working on my Blooming NB-1360E?
If the cleansing, bidet, and dry functions aren't working on your Blooming Toilets, check if a seat cover or something is on the seat. The unit operates only when a user’s skin touches the seat sensor.
How to adjust the water temperature on Blooming NB-1360E Toilets if it's too low?
If the water temperature is too low on your Blooming Toilets, it could be because the water temperature level is turned off or set to “Low”. Try adjusting the water temperature level.
How to fix a seat that is not warm on Blooming Toilets?
If the seat on your Blooming Toilets isn't warm, the warm seat temperature level might be turned off or set to “Low”. Adjust the warm seat temperature level to your desired setting.
General| Brand | Blooming |
|---|---|
| Model | NB-1360E |
| Seat Heating | Yes |
| Water Heating | Yes |
| Drying | Yes |
| Color | White |
Identifies the primary parts of the bidet appliance, including the lid and control panel.
Details the buttons and indicators on the bidet's control panel for operation.
Lists and illustrates the accessory parts provided with the bidet for installation.
Explains the Move (oscillating wash), Auto Cleansing, and Auto Drain operations.
Covers adjustments for nozzle position, water pressure, dryer, water, and seat temperatures.
Details power control, burn protection, and AUTO/SMART Eco-mode features.
Describes LED Nightlight, Self Nozzle Cleaning, and SMART Nozzle-Cleaning functions.
Provides step-by-step instructions for cleaning the water strainer.
Details procedures for cleaning the bidet nozzle and the external unit.
Instructions for draining the water tank to prevent freezing during winter.
Outlines the terms and conditions for free after-sales service and warranty coverage.
