To Next PageTo Next PageWhat to do if my Blooming Toilets unit does not operate at all?
If your Blooming Toilets unit isn't working, there could be a few reasons. First, press any button to check if the power is off. If that doesn't work, check the power plug to ensure it's properly connected. Lastly, check for a power failure in your home.
Why is the water pressure low on my Blooming NB-1360R Toilets?
If you're experiencing low water pressure with your Blooming Toilets, it might be due to a couple of things. First, check if the water pressure level is set to “Low” and adjust it accordingly. Also, the water strainer might be clogged, so try cleaning it.
What to do if there is no water spray from my Blooming NB-1360R Toilets?
If your Blooming Toilets isn't spraying water, there are a couple of things to check. First, make sure the shut-off valve is open. Also, check to see if there is a water supply outage in your area.
Why is the cleansing, bidet, and dry function not working on my Blooming NB-1360R?
If the cleansing, bidet, and dry functions aren't working on your Blooming Toilets, check if a seat cover or something is on the seat. The unit operates only when a user’s skin touches the seat sensor.
How to adjust the water temperature on Blooming Toilets if it's too low?
If the water temperature is too low on your Blooming Toilets, it could be because the water temperature level is turned off or set to “Low”. Try adjusting the water temperature level.
How to fix a seat that is not warm on Blooming NB-1360R?
If the seat on your Blooming Toilets isn't warm, the warm seat temperature level might be turned off or set to “Low”. Adjust the warm seat temperature level to your desired setting.
How to fix dryer air that is not warm on Blooming Toilets?
If the dryer air isn't warm on your Blooming Toilets, the warm air dryer temperature level might be switched off or set to “Low”. Adjust the warm air dryer temperature level.
Identifies the primary components of the bidet unit shown in the diagram.
Guides users through sitting, operating functions, and stopping the unit.
Explains the automatic cleansing function and its default settings.
Adjusting water pressure levels from 1 to 5.
Selecting between low, medium, and high water temperatures.
Selecting between low, medium, and high seat temperatures.
Instructions for turning the unit on and off.
Automatic nozzle cleaning before and after operation.
Addresses problems like unit not operating or functions failing.
Troubleshoots low water pressure, low water temp, seat not warm, and dryer issues.
Troubleshooting steps for lack of water spray.
General
