2
609 E. Pine Street Orlando, FL 32801 • Phone 888-977-8366 • Fax 407-210-6833 • www.bluworldhomelements.com
Identification of Components
Carefully identify and count all components as shown below. Photos may very slightly from what you receive.
NOTES ON POSITIONING YOUR FOUNTAIN
a. Try to position your fountain near an electrical outlet. If being placed outdoors, please use a Ground Fault Circuit
Interrupter (GFCI) outlet. Position the base with the pump cord exiting on the left. See Step 3 for further
information regarding this.
b. When considering the location of your fountain, please consider making it easily accessible for maintenance (e.g.
adding water, performing regular maintenance, etc.).
c. Consider the surface on which your waterfall will be placed. Make certain that the area is flat, smooth, and level.
D.
Pump
Cord
Strain
Relief
E.
F.
Rock
Tray(s)
1
for
Mirror/Slate
Models
A.
Water
Pump
B.
Water
Filter/Flow
Valve
Assy.
C.
Bag
of
Rocks
Water
Guiding
Pad
To Next Page
Loading...