Blu Studio J1 - Page 10

NO.
Operation
name
Picture
Operation
and note
7
Remove
Speaker
Conductive Fabric,
Support Foam ,
Insulation
Mylar
1:Remove TP_IC
Conductive
Fabric with tweezers
2:Remove Speaker
Conductive
Fabric with tweezers
3:Remove 2pcs
Conductive Fabric
with tweezers
4:Remove 4PCS Conductive Foam
with tweezers
8
Remove
TP-IC
Conductive Fabric
1:Remove TP
-
IC Conductive Fabric with
tweezers
2:Remove Front Camera Foam with
tweezers
2:Remove Front Camera flash seal
rubber with tweezers
9
Remove PCBA
Conductive fabric，
Insulation
Mylar
1
：Remove the 2PCS
Conductive Fabric
and
Insulation Mylar
from the PCBA Board
with tweezers