28 Blue Diamond Attachments, LLC Brush Cutters
September 2020 888-376-7027
6. Storage
6.1 Storage Safety
At the end of the season, the cutter should
be thoroughly inspected and prepared for storage.
Repair or replace any worn or damaged components to
prevent any unnecessary downtime at the beginning of
the next season.
Personal Injury Hazard
Store the cutter in an area away from
human activity. T
o prevent the possibility of
serious injury, do not permit children to play on or
around the stored cutter.
Crush Hazard
Always set the cutter on safety stands or on
blocks for storage.
To prevent damage to the cutter, store it in a dry, level
area.
6.2
Placing In Storage
1. Remove all entangled vegetation.
2. Thoroughly wash the cutter with a pressure washer
or water hose to remove all clippings, dirt, mud, or
debris.
3. Select an area that is dry
, level, and free of debris
(inside a building is ideal). Move the cutter to its
storage area.
4. Lubricate all grease points. Make sure all grease
cavities have been filled with grease to remove any
water residue from washing.
5. Touch up all paint nicks and scratches to prevent
rusting.
6.3 Removing From Storage
When removing the cutter from storage, follow this
procedure:
1. Attach the cutter to the tractor lift arms.
2. Raise the cutter up off the blocks.
3. Before placing the cutter back into service, replace
any worn or defective parts and perform the Pre-
Operation Checklist.
To Next Page