5 Blue Diamond Attachments, LLC Brush Cutters
September 2020 888-376-7027
1. INTRODUCTION
1.1 Welcome
Standard Offset Configuration
Congratulations on your choice of a Blue Diamond
Attachments, LLC Multi-Purpose Cutter. This
equipment has been designed and manufactured to
meet the needs of discerning users.
The Blue Diamond Multi-Purpose Cutter is designed to
cut grass, weeds, and light brush.
Many features incorporated into this Multi-Purpose
Cutter are the result of suggestions made by
customers like you. Read this manual carefully to
learn how to operate the Multi-Purpose Cutter safely
and how to set it to provide maximum cutting
efficiency.
The offset mowers are designed for light-duty
applications such as weed, grass, and light brush up to
3” diameter. The cutters can be used to mow under a
fence line or it can be turned vertically to mow the
sides of hedgerows and tree lines.
The cutter uses a single spindle with two free-swinging
blades, which reduce the shock of impact when a
stationary object is contacted. A shear key in the input
shaft protects the motor from damage.
WARNING
Operating the Multi-Purpose Cutter without
the safety shield can result in physical
injury or death. Make sure the shield is
properly installed and in working condition
before operating the Multi-Purpose Cutter.
By following the operating instructions in conjunction
with a good maintenance program, your Multi-Purpose
cutter will provide many years of trouble-free service.
1.2 Safe Operation
Safe, efficient, and trouble-free operation of your
Multi-Purpose Cutter requires that you, and anyone
else who will be using or maintaining the unit, read
and understand the information contained within the
Owner’s Manual.
Use this manual for frequent reference and to pass on
to new operators or owners.
Read And Understand Manual
To prevent personal injury or even death, be
sure you read and understand all of the
instructions in this manual and other related
OEM equipment manuals! The Multi-Purpose
Cutter, if not used and maintained properly, can be
dangerous to users unfamiliar with its operation. Do
not allow operating, maintaining, adjusting, or
cleaning of this Multi-Purpose Cutter until the
user has read this manual and has developed a
thorough understanding of the safety precautions
and functions of the unit.
This Multi-Purpose Cutter is designed for the specific
purpose of cutting grass, weeds, and light brush.
DO NOT modify or use this Multi-Purpose Cutter
for any application other than that for which it was
designed.
Offset mowers maintained or operated
improperly or by untrained personnel can be
dangerous; exposing the user and/or
bystanders to possible serious injury or death.
1.3 Intended Usage
Do not use this Multi-Purpose Cutter for any other
purpose than its intended use; cutting grass, weeds,
and light brush and an in-line or offset application.
To Next Page