TEMP
FAN
No power
The oven will not
Start/Stop Button
PROBLEM
Ensure oven in plugged into 3-prong grounded outlet
Ensure the circuit breaker has not tripped and the oven is the only
item running on the circuit breaker
When you press the Start/Stop Button, the oven will keep running
or you will turn the oven back on. Always unplug the oven when
not in use.
Ensure that you have completed the steps in "Before Your First
Cooking foods with a high fat content at too high a temperature,
Reduce temperature.
Food on the Rotisserie is contacting the top heating elements.
Ensure your food, especially chicken, is trussed tightly before
cooking on the Rotisserie.
The Baking/Drip Pan is not placed in the oven when Rotisserie
cooking. Always ensure it is in place to capture grease from the
food on the Rotisserie Spit.
The food being cooked is very fatty and either dripping or spit-
ting grease. Add a little water to the Baking/Drip Pan to prevent
grease in the pan from smoking.
There is built up food residue inside the oven. Clean the oven
per the Care and Cleaning section of the manual. Remove excess
crumbs and food particles from the Removable Crumb Tray.
SOLUTION
I cannot change
the Timer
I cannot change
the Function
I cannot change
the Fan Speed
PROBLEM
the Display. Press the Temp/Time Knob until the Timer begins to
If you want to change the Timer after the cooking cycle has
started, press the Start/Stop Button then press Temp/Time
desired setting. After you have selected the desired setting, press
the Start/Stop Button to continue the cooking cycle with the new
setting.
The function can only be set when the function selection is
If you want to change the function after the cooking cycle has
started, press the Start/Stop Button then press the Function/
the desired function, press the Start/Stop Button to continue the
cooking cycle with the new setting.
on the Display. Press the Function/Fan Knob until the Fan Speed
If you want to change the fan speed after the cooking cycle has
started, press the Start/Stop Button then press the Function/Fan
desired fan speed, press the Start/Stop Button to continue the
cooking cycle with the new setting.
SOLUTION
Troubleshooting Troubleshooting (Cont.)
21 22
To Next Page
Loading...