Blue Seal Evolution GP51 - Page 20

5
Trouble-shooting
16
© Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Gas Griddles
Fault Possible cause Remedy
Main burner flame
incorrect colour (yellow / wavy).
Aeration setting incorrect.
Incorrect gas pressure.
Incorrect injector size.
Obstruction in burner.
Adjust aeration.
(Refer service section 6.4.4)
Check supply pressure.
Check injector correct size.
Inspect burner for obstruction.
Pilot goes out when main burner
comes on.
Incorrect gas pressure.
Faulty gas control.
Check supply / adjust pressure.
(Refer specifications section)
Replace gas control.
(Refer service section 6.2.12)