Blue Seal Evolution GP51 - Service Procedures; 6.2 Replacement

6
Service Procedures
18
© Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Gas Griddles
ALL INSTALLATION AND SERVICE REPAIR WORK MUST BE CARRIED OUT BY
QUALIFIED PERSONS ONLY.
ENSURE GAS SUPPLY IS SWITCHED OFF BEFORE SERVICING
ALWAYS CHECK / TEST FOR GAS LEAKS AFTER SERVICE REPAIRS ON THE GAS
SYSTEM
WARNING:
Section Page no.
6.1 Access .................................................................................................... 18
6.1.1 Control Panel...........................................................................................................18
6.2 Replacement........................................................................................... 18
6.2.1 Griddle Burner.........................................................................................................18
6.2.2 Griddle Burner Injector.............................................................................................19
6.2.3 Pilot Burner.............................................................................................................19
6.2.4 Pilot Burner Injector.................................................................................................20
6.2.5 Thermocouple .........................................................................................................20
6.2.6 Spark Electrode .......................................................................................................20
6.2.7 Piezo Ignitor ...........................................................................................................20
6.2.8 Gas Control Valve ....................................................................................................20
6.3 Adjustment / Calibration ....................................................................... 21
6.3.1 Thermostat Calibration.............................................................................................21