EasyManua.ls Logo

Blue Wave SANDMAN NE6150 - User Manual

Blue Wave SANDMAN NE6150
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V1: 0122
SKU# NE6150 / NE6170
SANDMAN
TM
SAND FILTER
SYSTEM WITH PUMP
INSTRUCTION MANUAL
Questions, problems, missing parts?
Before returning to your retailer, call our Consumer Hotline at 1-800-759-0977,
Monday – Friday. 8am – 5pm (CST)
*INCLUDES BASE FOR
BOTH FILTER AND PUMP

Table of Contents

Questions and Answers

  • J
    Jasmine FernandezAug 6, 2025
    What to do if pool water won't clear up with Blue Wave SANDMAN NE6150?
    • C
      Carla Greene DDSAug 6, 2025
      To address pool water clarity issues with your Blue Wave Water Pump, ensure the chlorine, pH, and total alkalinity levels are properly adjusted. Verify that the water flow rate through the filter is sufficient and that the filter operates for extended periods. Also, check that the valve is set to the 'Filter' position and the sand level in the tank is between 1/2 and 3/4 full.
  • A
    Ann AndrewsAug 15, 2025
    How to fix low water flow in Blue Wave Water Pump?
    • S
      Sonya SnyderAug 15, 2025
      If you're experiencing low water flow with your Blue Wave Water Pump, begin by inspecting the skimmer and pump strainer baskets for any accumulated debris. Next, check for any restrictions present in the intake and discharge lines. Additionally, examine the intake line for potential air leaks, which are often indicated by bubbles returning to the pool. Backwash the filter and ensure the sand level in the filter is at least 1/2 full.
  • G
    Grace CohenAug 27, 2025
    Why does my Blue Wave SANDMAN NE6150 Water Pump have short filter cycles?
    • J
      Jack JensenAug 27, 2025
      To resolve short filter cycles in your Blue Wave Water Pump, first check for algae in the pool and superchlorinate if necessary. Ensure that chlorine and pH levels are within the correct range and adjust them as needed. Inspect the surface of the filter sand for crusting or cracking, removing 1 inch of sand if required. Also, check the hair and lint basket on the pump for potential air leaks, lubricating the basket lid O-ring if necessary.

Summary

Safety Information

Product Specifications

Assembly Instructions for Sand Filter

Step 1: Valve Removal

Guides through the initial disassembly of the valve from the filter tank using a screwdriver.

Step 2: Filter and Pump Base Attachment

Details attaching the filter and pump to the base, covering two mount types: cradle and housing.

Step 3: Sand and Standpipe Preparation

Covers preparing the standpipe, adding filter-grade sand, and initial water filling.

Step 4: Valve Installation

Explains how to attach the 6-way valve to the filter tank, ensuring a proper seal with the O-ring.

Step 5: Clamp and Gauge Installation

Details securing the valve with a closure clamp and installing the pressure gauge with Teflon tape.

Step 6: Hose and Fitting Connections

Describes connecting hoses, fittings for pump, return, and waste ports, and checking the drain plug.

Operating Your Filter

Troubleshooting

Low Water Flow Issues

Lists common causes and solutions for reduced water flow through the filter system.

Short Filter Cycles

Provides checks for issues causing the filter to cycle too frequently or not effectively.

Pool Water Clarity Problems

Offers troubleshooting steps for issues related to cloudy or unclear pool water.

Winterizing Guide

One-Year Limited Warranty

Blue Wave SANDMAN NE6150 Specifications

General IconGeneral
BrandBlue Wave
ModelSANDMAN NE6150
CategoryWater Pump
LanguageEnglish

Related product manuals