To Next PageTo Next PageWhat to do if my Blue-White industries FLEXFLO A1A Water Pump motor has over current?
If your Blue-White Industries Water Pump motor is experiencing an over current, a possible solution is to check that the tube is properly installed.
What should I do if my Blue-White industries FLEXFLO A1A Water Pump temperature exceeds 75°C?
If the temperature of your Blue-White Industries Water Pump exceeds 75°C at the control, check the ambient conditions. After it has cooled to ambient temperature, restart the pump.
What to do if my Blue-White industries FLEXFLO A1A Water Pump shows over voltage?
If your Blue-White Industries Water Pump is showing an over voltage error, check the power supply output voltage.
What to do if my Blue-White industries FLEXFLO A1A shows under voltage?
If your Blue-White Industries Water Pump is showing an under voltage error, check the power supply output voltage.
Lists available FlexFlo A1A peristaltic metering pump models and their specifications.
Details materials used for components in contact with pumped fluids, including tubing and valve parts.
Details materials used for external and internal components not in contact with pumped fluids.
Lists agency approvals and certifications, such as ETL, CE, and NSF for the pump.
Provides guidance on selecting an appropriate area for pump installation, considering proximity to supply and serviceability.
Detailed steps and diagrams for securely mounting the FlexFlo A1A pump to a wall.
Instructions for assembling and installing the discharge injection fitting and suction strainer.
Explains the 4-pin M8 connector pinout for relay and remote start/stop functions.
Describes pump operation modes based on LED indicators and P3-P4 connections.
Procedure to test the TFD system's ability to detect specific chemicals in the pump head.
Guidelines for weekly checks, identifying chemical attack, and replacing worn components.
Instructions for cleaning the pump head, motor shaft, and lubricating key parts.
Identifies the specific tool provided for assisting with tube installation.
Step-by-step instructions for safely disconnecting and removing the pump tube.
Detailed instructions for properly inserting and securing the new pump tube into the pump head.
Details the 36-month warranty period and conditions for repair or replacement.
Lists components and conditions not covered under the pump's warranty, such as perishable parts.
Provides instructions on how to initiate the warranty repair process, including RMA and shipping.
General| Brand | Blue-White industries |
|---|---|
| Model | FLEXFLO A1A Series |
| Category | Water Pump |
| Language | English |
