Blue-White FLEXFLO A1 Series User Manual

®
Congratulations on purchasing Blue-White’s FLEXFLO Series A1 peristaltic metering pump (a peristaltic meter-
ing pump is a type of positive displacement pump used for pumping a variety of fluids).
®
The FLEXFLO Series A1 peristaltic metering pump is pre-configured for the tubing that is shipped with it.
NOTE: It is recommended that the pump have a one-hour break-in period before calibrating the new tube.
NOTE: The tubing has an identification number printed on the tube for easy re-ordering.
NOTE: The pump was pressure-tested at the factory with clean water before it was shipped, so there may be
trace amounts of clean water in the pre-installed tube assembly. This is part of Blue-White’s stringent
quality assurance process.
1.1 Available Models
1.0 INTRODUCTION
Page 4
®
FLEXFLO A1
NOTES:
*Data pertains to both “T” and “M” connection types for A1F and A1V Models
Tube Model
Feed Rate
Maximum Pressure
PSI (bar)
Maximum
Temperature
°F (°C)
GPH
LPH
A1-1*
0.001 - 1.09
0.002 - 4.13
65 (4.50)
130 (54)
A1-3*
0.003 - 5.60
0.011 - 21.2
50 (3.45)
130 (54)
A1-6*
0.001 - 1.35
0.003 - 5.14
100 (6.89)
185 (85)
A1-7*
0.002 - 4.17
0.008 - 15.8
50 (3.45)
185 (85)
A1-8*
0.002 - 3.09
0.006 - 11.7
50 (3.45)
130 (54)

Blue-White FLEXFLO A1 Series Specifications

General

Brand	Blue-White
Model	FLEXFLO A1 Series
Category	Measuring Instruments
Language	English