4
Blue 3210/3410
Blueair purifiers are available in two models. All models have a pre-filter and a HEPASilent
TM
main filter to purify air. All Blue models have control functions and a built in sensor.
The air purifier is mainly composed of a motor, a fan and filters. The air purifier removes
contaminants from the air in a room to improve indoor air quality.
You can change the air purifier settings at any time, using the control panel on the air purifier.
Recommendations for best performance
• Use the air purifier in a room that does not exceed the room size recommendation.
• Place the air purifier in a location where air can circulate freely in, out and around the air
purifier.
• Do not place the air purifier closer than 10 cm to another object.
• During operation, keep doors and windows in the room with the air purifier closed.
• Only use original Blueair filters.
• Change the main filter when the filter replacement indicator appears on the control
panel.
• Follow the maintenance instructions in this user manual.
To Next Page