Blueant Q3 - Reset the Q3

17
If the phone rings the audio will mute. You can use your voice
to answer or ignore the call. Or:
> Click the Command button to accept the call.
> Double click the Command button to ignore the call.
The audio will resume when the call ends.
If you want to exit A2DP streaming mode to do something else:
> Click the Command button to activate the Q3’s voice control
feature. If you do not say one of the Q3’s voice commands
within a few seconds the music will resume playing; or
> Double click the Command button to activate your phone’s
voice dialing feature (if available).
Reset the Q3
If you are having problems with the Q3, you can reset it and
start again.
Resetting the Q3 will clear all the stored pairing settings, reset
the volume orientation to the default and put the device back
into pairing mode.