Blueant X2 - Page 6

F) Duo Mode
Dual speaker wireless stereo pairing for wide stereo sound stage.
. Press the power button on the first speaker to tumn the speaker *On”
. Press and hold the Volume + and Volume - buttons on the first speaker until the
speaker says ‘Duo Mode pairing then release the buttons
Press the power button on the second speaker o turn the speaker “On”
Press and hold the Volume + and Volume - buttons on the second speaker until
the speaker says “Duo Mode pairing’ then release the buttons
Please wait until one speaker says “Duo Mode connected”. This may take up to 1
minute. The speakers are now connected to each other.
6. The speaker that says “Duo Mode connected” is the master speaker and this is
the speaker that you should pair with your phone.
o
mw
o
For Bluetooth pairing search for “BlueAnt X2' on your phone.If you receive a
phone call while in Duo Mode the call will only come through the master speaker.
When in Duo Mode and you Power off one speaker both speakers will power off .
When you Power on the speakers, they need to be tumed on individually.
When both speakers are powered on Duo Mode will automatically reconnect
and you will hear “Duo Mode connected”To disconnect Duo Mode press and
hold Volume + and Volume - until you hear “Duo Mode disconnected”.
To clear Duo Mode pairing press and hold Volume + and Volume - until the
speaker says “Duo Mode cleared". This takes about 8 seconds.
Assuming direct ine of sight, you should achieve be able to achieve a range of
over 40 metres between the two speakers.
When used indoors the range will be affected by interal walls or obstacles
between the speakers.